Rode VideoMic Pro Stereo mikrofon za fotoaparat i kamkorder

Ideal for Video & DSLR Cameras
Integrated Shoemount/Shockmount
Level Switch: -10dB / 0dB / +20dB
High-Pass Filter Switch: 75Hz
Durable Multi-Strand Cable
1/8" (3.5mm) Output Connector
9V Battery Powered

Transducer Pressure Gradient, JFET impedance converter
Polar Pattern XY Cardioid (Coincident)
Frequency Range 40Hz ~ 20,000Hz (selectable HPF@75Hz)
Output Impedance 200?
Maximum Output +4.2dBu (@ 1% THD into 1k?)
Power Supply 9V alkaline battery
Connection 1/8" (3.5mm) stereo mini-jack
SPL 134dB, max (1 kHz, 1% THD into 1k?)
Sensitivity -38dB re 1V/P (12.6mV @ 94dB SPL) ±2dB @ 1kHz
EIN 20dBA SPL (A - weighted per IEC651)
Dynamic Range 100dB (per IEC651)
Signal to Noise Ratio 73dB SPL (A - weighted per IEC651)
Dimensions 2.6 x 4.25 x 5.1" (66 x 108 x 130 mm)
Weight 4.1 oz (117 g) (without battery)

The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic's capsule feature a matched pair of 1/2" cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone's small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8" (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.

The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.

Broadcast recording quality on-camera microphone
Matched pair 1/2" condenser capsules in XY stereo configuration
Ultra lightweight, compact form factor
Two step High Pass Filter (flat, 75Hz)
Three position level control (-10dB, 0, +20dB)
9V battery powered - over 100 hours use (alkaline)
Integrated shock mounting
Integrated foam windscreen
3.5mm stereo mini-jack output
Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting