Freefly Movi M10 3-Axis Motorized Gimbal Stabilizer with MIMIC Control & Spektrum Controller Kit

Additional Freefly MÔVI MR Features:

•Live wireless tuning & graphing
•Remote Firmware Updatable
•Drift Free Horizon
•Silent Drive
•Shot Recorder
•Custom Direct Drive Motors



FREEFLY MOVI M10 3-Axis Motorized Gimbal Stabilizer

The MOVI M10 3-Axis Motorized Gimbal Stabilizer from Freefly is a camera stabilization system that uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll. In particular, it works to compensate for handshake or vehicle-induced vibration as well as reduce translation. It is designed for DSLRs and smaller cinema cameras and can accommodate cameras weighing up to 12 pounds. There is a quick-release adapter available separately so that it can be mounted on cranes, jibs, vehicles mounts, and other camera support equipment. There is also an MR (multi-rotor) version, the MOVI MR, for mounting a camera on a UAV. You can also add the MR conversion kit, available separately, later on to convert the M10 for use on a UAV.

The system supports single- or dual-operator control. In single user (Majestic) mode, the system's software intelligently differentiates unwanted shake or vibration from intentional movement, such as panning, while keeping the horizon level. Alternatively, you can have a dedicated operator (Stabilized Slew mode) with a remote control or RC transmitter who is in charge of camera pan, tilt--and if you want--roll. In this configuration, the camera will always point where the operator of the remote tells it to, independent of how the rig operator moves.

As with sled-style stabilizers, the camera should be balanced on the MOVI to ensure best performance. Once balanced, the MOVI will need to be linked via Bluetooth to an Android mobile device or a computer or tablet running Windows to finalize the configuration process.

Two lithium-polymer (LiPo) batteries and a charger are included, as well as a top handle for low-angle shooting or transporting the assembled rig on set.



Supported Cameras
The MOVI M10 is meant to support DSLRs and smaller cinema cameras weighting up to 12 pounds. Cameras that have been tested on the system include the Canon C500, Canon C300, RED EPIC, RED Scarlet, Blackmagic Cinema Camera, Canon EOS-5D Mark III, Panasonic DMC-GH3, and Sony NEX-FS100
Supported Lenses
The system has been tested with focal lengths up to 120 mm. Larger sizes may technically be used as long as the 12 pound total weight limit is respected; however with longer there is an increased risk of collision with gimbal components
Remote Operation
The MOVI can be operated remotely either with a dedicated controller or using an RC aircraft transmitter (hand-held radio controller). It supports Spektrum DSMX and Futaba SBUS transmitters with at least six channels, including the Spektrum DX7s. Wireless range will vary depending on the transmitter used
Three Control Modes
Majestic Mode: For single-operator use. In this mode the gimbal provides stabilization without counteracting operator-directed camera movements--the camera goes where you point the handles. This mode is ideal for accurate framing in tight situations
Stabilized Mode: Assumes no operator input, compensating for all movement it detects. Ideal scenarios for this mode include when the gimbal is mounted to a car or shots where the camera is moving but the camera angle remains fixed
Slew Stabilized Mode: For dual-operator control. In this mode an operator with a dedicated remote or RC transmitter controls pan, tilt, and roll independently of the gimbal handeler's movements
Drift Free Horizon
The gimbal uses a GPS-assisted IMU that when used outdoors with available satellite signals is able to minimize drift even when under acceleration--such as where the camera is mounted on a UAV or vehicle
Live Wireless Tuning and Graphing
A real-time Bluetooth wireless link is provided by the gimbal which transmits performance data for live adjustment of any of the gimbal parameters using software for Windows or Android
Silent Drive
The motors driving the gimbal have been designed to operate as quietly as possible to ensure you will be able to record sound without picking up any unwanted noise
Translation Compensation
Making hundreds of adjustments per second, the software works to counteract translation--the bobbing up and down effect while running--when tracking a moving subject moving at high speed. In this situation translation may be unavoidable, but at least the subject will remain in-frame
Shot Recorder
Keeps a record of the camera position (where GPS is available), height, camera pan, tilt, and roll so that the shot can be recreated later or to help Visual Effects align the live action shot with other elements in a CG composite
Third-Party Mounting
Using separately available mounting hardware it is possible to mount the MOVI on cranes, jibs, Steadicams and similar vest-supported stabilizers (where it corrects for angular error), and other camera support hardware. It has also been verified to work on an Easyrig
Remote Firmware Updatable
You can upgrade the gimbal to new software features as they are released by Freefly yourself, without having to send the device in for a factory update
Custom Direct Drive Motors
the MOVI system uses motors that were custom made for the gimbal rather than re-purposing off-the-shelf parts
User Adjustable "Shakey Cam"
Want an organic hand-held look? The MOVI provides variable noise filters that allows you to effectively dial in a custom amount of shake to help you achieve the effect you are after



FREEFLY MIMIC

Designed to replace a joystick when operating MoVI gimbals, FREEFLY's MIMIC allows you to intuitively control your MoVI by simply moving your hands. Just imagine a flight simulation system -- it works just like one. When you want to move your MoVI left, just steer the MIMIC left; when you want to move up, tilt up; and -- it also features roll capability, which gives the feeling of actually flying the MoVI, especially with a monitor attached. Moreover, when there's a monitor attached, you feel very much in sync with the system, as your body follows your eyes instinctively.

The MIMIC is compatible with the M5, M10, and M15 MoVI gimbals. Included with it are a transmitter, receiver for your MoVI, monitor mount, and a small USB battery.

Key Features
Control your MoVI by simply moving your hands (replaces controller joystick)
Pan, tilt, and roll movement
Compatible with the M5, M10, and M15 MoVI gimbals
Transmitter, receiver, monitor mount, and battery included

FREEFLY Spektrum DX7s Transmitter for MOVI

The Spektrum DX7s Transmitter for MOVI from Freefly lets you take advantage of the Dual Operator Mode with your MOVI 3-Axis Gimbal Stabilizer, allowing one operator to hold the gimbal while the other remotely controls camera pan, tilt, and roll. The 7-channel handheld controller works on the 2.4GHz frequency band, utilizing DSM2/DSMX technology. It features an ergonomic design with a balanced weight and rubber grips for comfortable handling, and quad-bearing gimbals for precise control. It offers four mode configurations as well as a built-in telemetry feature that gives you real-time information on battery voltage, signal quality, and more.

The DX7S is equipped with Spektrum AirWare software, which features a SimpleScroll interface making navigating menus and changing settings as simple as "roll and click." The AirWare software can be updated using the included 128MB SD card. The transmitter is powered using an included 4.8V Ni-MH battery. An AC battery charging cable is also included.

7-channel transmitter
Enables remote control of pan, tilt, and roll of a MOVI 3-Axis Gimbal Stabilizer
Operates on 2.4GHz band
Ergonomically designed case with comfortable rubber grips
Adjustable stick length and tension
Quad-bearing gimbals
User-adjustable mode configurations (1, 2, 3 or 4)
User-assigned switch functions
126 x 64 LCD screen
AirWare software with intuitive SimpleScroll programming interface
AirWare software can be updated using the included 128MB SD card
4.8V 2000mAh NiMH battery included
Li-Po battery compatibility
Language select (English, Italian, French, Spanish, or German)
High-speed 11ms frame rate with 2048 resolution



SPECIFIKACIJE:

FREEFLY MOVI M10 3-Axis Motorized Gimbal Stabilizer

Electrical and Mechanical
System Type 3-axis gyro stabilized
Pan Range 360°
Tilt Range ±180°
Roll Range ±180°
Slew Rates 0 to 150°/sec
Interface Bluetooth connection to Windows/Android GUI
Control Modes
Majestic Mode Stabilized with operator control via gimbal base
Stabilized Stabilized image with no operator input
Stabilized Slew Stabilized with remote operator
Off Kills drive to gimbal axes
Battery
Chemistry Lithium-polymer
Capacity 2.6 Ah
Voltage 14.8 VDC
Maximum Continuous Discharge 3 C (7.8 A)
Maximum Burst Discharge 5 C (13 A)
Maximum Charge Voltage 4.2 V per cell
Minimum Discharge Voltage 3.0 V
Dimension L x W x H 3.9 x 1 x 1.2" / 100 x 25 x 30 mm
Weight 7.1 oz / 200 g
General
Weight Capacity Maximum: 12 lb / 5.4 kg
Power Requirements 9 to 18 VDC (3S or 4S LiPo)
Dimensions Camera Tray: 7.9 x 5.5 x 7.9" / 200 x 140 x 200 mm
Storage: Varies, depending on how system is broken down
Weight 3.4 lb / 1.5 kg
Packaging Info
Package Weight 16.4 lb
Box Dimensions (LxWxH) 26.5 x 24.5 x 7.0"

FREEFLY MIMIC

Compatibility Compatible with the M5, M10, and M15 MoVI gimbals
Movement Axes Pan, tilt, and roll
Packaging Info
Package Weight 2.55 lb
Box Dimensions (LxWxH) 24.0 x 10.4 x 4.7"

FREEFLY Spektrum DX7s Transmitter for MOVI

Number of Channels 7
Modulation DSM2 / DSMX
Band 2.4 GHz
Modes Selectable 1, 2, 3, or 4
Model Memory 20
Battery 1 x 4-cell 2000 mAh, Ni-MH
Packaging Info
Package Weight 3.95 lb
Box Dimensions (LxWxH) 14.4 x 11.2 x 6.4"

SKU: 950-00041

UKLJUČENO:

MoVI M10
MR Conversion Kit
Batteries
Battery Charger
MoVI Stand