Yongnuo RF-603 II C1 RF-603IICX2-C1 Canon wireless flash trigger bežični okidač za bljeskalice RF-603II RF603II RF603IIC RF-603IIC

Omogućava bežično okidanje jedne ili više bljeskalica, a opcionalno se može koristiti i kao daljinski okidač za fotoaparat s podržanom bulb opcijom

SPECIFIKACIJE:

Domet: 100 metara
Frekvencija: 2.4GHz
Broj kanala: 16
Način rada: M
Vrijeme rada u pripravnosti: 45 sati
Konekcije: PC port, hot shoe
Brzina sinkronizacije: 1/180, 1/200, 1/250, 1/320s (ovisno o modelu fotoaparata)
Napajanje: 2x AAA baterije (svaka jedinica)
Dimenzije: 37mm x 30mm x 81.5mm
Težina: 2x 150g

U PAKETU DOLAZI:

- Yongnuo RF-603II primopredajnik (2 komada)
- Sinkronizacijski kabel
- Originalno pakiranje

UREĐAJI KOJE PODRŽAVA:

Canon DSLR APS-C i Full Frame fotoaparati: 60D, 70D, 80D, 350D, 400D, XTi, 450D, XSi, 500D, T1i, 550D, T2i, 600D, T3i, 650D, T4i, 700D, 750D, 1000D, 1100D, 100D

Okidanje svih bljeskalica:

- Yongnuo, Metz, Meike, Sunpak, Canon, Nikon, Pentax, Olympus, Sony, Minolta, Sigma, Vivitar, Nissin i druge
- Yongnuo YN460, YN462, YN460 II, YN465, YN467, YN467 II, YN468, YN468 II, 500EX, YN560, YN560S, YN560 II, YN560 III, YN565EX, YN560EX, YN565EX, YN568EX, itd.
- Canon 420EX, 430EX, 430EX II, 580EX, 580EX II, 600EX, 600EX RT, itd.
- Metz 36 AF-1, 36 AF-2, 36 AF-3, 36 AF-4, 36 AF-5, 44 AF-1, 44 AF-2, 50 AF-1, 50 AF-2, 58 AF-1, 58 AF-2, itd.
- Meike MK-580, MK-900, itd.
- Nikon SB900, SB-900, SB910, SB-910, SB800, SB-800, SB700, SB-700, SB600, SB-600, SB400, SB-400, itd.
- Olympus FL-50R, FL-600R, itd.
- Pentax AF 540FGZ TTL, AF 360FGZ TTL, itd.


Improved Features -

Higher Sync Speeds, up to 1/320th (RF-602 were slow, RF-603 were very slow)
Locking Rings on trigger foot (RF-603 and flash on top would fall off the camera)
Pass Through Hotshoe now usable (see point above) though still manual only no TTL
Power Switch Finally Moved to the Side (was blocked by the flash on 602 & 603)
Compatible with non Canon/Nikon and single firing pin cameras (RF-603 was not)
Test Fire Button works off the camera hotshoe (for taking light meter readings) (RF-603 did not)
300v Safe Trigger Voltage (for hotshoe and PC sync port) (602/603 where low 12 volt safe limit)